ALU80 Aluminum spirit level 80 mm; 0.4 mm/m for screwing on |
Delivery weight: 0.059 kg
In stock |
Sturdy design made of high-quality steel, textured finish. With a flat sole, for easy adjustments of horizontal surfaces. The measuring surface is finely ground. The device is equipped with a ground spirit level. This spirit level comes with 2 screw holes for M5 screws. The scale value of the longitudinal spirit level is given on the type plate. |
|
Lightweight aluminum design with flat and prismatic measuring surface (120°), for easy adjustment of horizontal surfaces and shafts. Maximum shaft diameter: 40 mm, minimum shaft diameter: 6 mm. The surface is silver anodized. The device is equipped with a ground longitudinal spirit level. The scale value of the longitudinal spirit level is given on the type plate. |
|
Round 2-axis stainless steel VA 1.4305 spirit level with a flat, finely honed bearing surface, specially designed for simultaneously aligning horizontal surfaces in both horizontal axes. The device is equipped with 2 equal, polished and solid longitudinal spirit levels. This spirit level is supplied with 3 holes and countersinks for screwing on M4 screws. |
In stock |
Round 2-axis stainless steel VA 1.4305 spirit level with a flat, fine-grained bearing surface, specially designed for simultaneously aligning brackets in both horizontal axes. The device is equipped with 2 equal, polished and solid longitudinal spirit levels. Suitable housing recesses allow lateral reading of the vials, thus advantage at higher measuring points. This spirit level was specially developed for bridge construction. |
In stock |
With flat base. The measuring surfaces are finish ground. Measuring base 300 x 25 mm. Equipped as standard with two mounting holes in distance of 275 mm. |
In stock |