Print

Standard spirit levels


Display per page
Sort by

ALU80

Aluminum spirit level 80 mm; 0.4 mm/m for screwing on

120.50 *
Product data sheet
Delivery weight: 0.059 kg

orderable

Sturdy design made of high-quality steel, textured finish. With a flat sole, for easy adjustments of horizontal surfaces. With housing recesses for lateral insight. The measuring surface is finely ground. The device is equipped with a ground longitudinal glass bubble. This spirit level comes with 2 screw holes for M5 screws. The scale value of the longitudinal spirit level is given on the type plate. Magnet version and special versions available on request.

128.70 *
Product data sheet

Lightweight aluminum design with flat and prismatic measuring surface (120°), for easy adjustment of horizontal surfaces and shafts. Maximum shaft diameter: 40 mm, minimum shaft diameter: 6 mm. The surface is silver anodized. The device is equipped with a ground longitudinal glass bubble. The scale value of the longitudinal spirit level is given on the type plate. Magnet version and special versions available on request.

52.80 *
Product data sheet

Round 2-axis spirit level, based on DIN 877 (2nd line on the outside is missing for reasons of space), made of VA 1.4305 with a flat, finely ground contact surface, especially for the simultaneous alignment of horizontal surfaces in both horizontal axes. The device is equipped with 2 identical, ground and divided longitudinal glass bubbles. This spirit level comes with 3 holes and countersinks to screw on for M4 screws. Magnet version and special versions available on request.

209.20 *
Product data sheet

orderable

Round 2-axis spirit level made of rustproof VA 1.4305 with a flat, finely ground contact surface, especially for the simultaneous alignment of supports in both horizontal axes. The device is equipped with 2 identical, ground and divided longitudinal glass bubbles. Appropriate housing recesses allow the spirit level to be read from the side, which is an advantage for higher measuring points. This spirit level was specially developed for bridge construction. Magnet version and special versions available on request.

383.00 *
Product data sheet

orderable

Sturdy design made from high-quality special cast iron, textured finish, with a flat sole. The device is equipped with a 360° dial and allows easy measurements of any inclined surface (also overhead). The contact surface is finely ground. The device is equipped with a simple bubble level. This spirit level is supplied with 2 holes spaced 275 mm apart with a countersink for M5 screws. Magnet version and special versions available on request.

313.00 *
Product data sheet

orderable

* Prices before VAT, plus delivery