Print

Precision spirit levels


Display per page
Sort by

Precision spirit level according to DIN 877. Sturdy design made of high-quality special cast iron, textured finish. With flat and prismatic measuring surface (150°), for aligning horizontal surfaces and shafts. With housing recesses for lateral insight. The measuring surfaces are finely ground. The device is equipped with a ground longitudinal level made of glass, a transverse level and full heat protection. The scale value of the longitudinal spirit level is given on the type plate. Magnet version and special versions available on request.

150.90 *
Product data sheet
Delivery weight: 1.52 kg

Adjustable precision spirit level according to DIN 877 with particularly ergonomically shaped and rubberized handles. Sturdy design made of high-quality special cast iron, textured finish. With flat and prismatic measuring surface (150°), for aligning horizontal surfaces and shafts. With housing recesses for lateral insight. The measuring surfaces are finely ground. The device is equipped with a ground, externally adjustable longitudinal level made of glass, a transverse level and full heat protection. The scale value of the longitudinal spirit level is given on the type plate. Magnet version and special versions available on request. The adjustable range is +/- 4.0 mm/m.

181.40 *
Product data sheet
Delivery weight: 1.35 kg

Precision frame spirit level according to DIN 877. Sturdy design made of high-quality special cast iron, textured finish. With 3 flat and prismatic (150°) sides and 1 flat, vertical side, for aligning horizontal and vertical surfaces and shafts. With housing recesses for lateral insight. The measuring surfaces are finely ground. The device is equipped with a ground longitudinal level made of glass, a transverse level and full heat protection. Magnet version and special versions available on request. The scale value of the longitudinal spirit level is given on the type plate.

251.70 *
Product data sheet
Delivery weight: 1.16 kg

Precision crankpin spirit level according to DIN 877. Sturdy design made of high-quality special cast iron, textured finish. With flat measuring surface and prismatic longitudinal and transverse prism (150°), for aligning very short, horizontal surfaces and crankshafts and journals on engines or machines. The measuring surfaces are finely ground. The device is equipped with a ground longitudinal level made of glass, a transverse level and full heat protection. The scale value of the longitudinal spirit level is given on the type plate. Magnet version and special versions available on request.

159.00 *
Product data sheet
Delivery weight: 0.61 kg

In stock

The prismatic measuring base with an angle of 154° (respectively 156° / length 250 mm) is used for arbors with diameter up to 950 mm. The measuring surfaces are finish ground. With one graduated and ground longitudinal vial and with transversal vial.

 

869.20 *
Product data sheet
Delivery weight: 2.85 kg

In stock

MICROLEVEL opt. remote control via app

Electronic precision water level (horizontal), ideally suited e.g. for mechanical engineering in the manufacture, installation and monitoring of machines of all kinds.

State-of-the-art electronics and sensors of the latest generation, built in high-quality and proven cast housing, bring the battery-powered device to the latest state of the art. Its simple and logical handling makes training unnecessary

2,290.00 *
Product data sheet

In stock

MICROLEVEL opt. remote control via app



Electronic precision water level (horizontal and vertical), ideally suited e.g. for mechanical engineering in the manufacture, installation and monitoring of machines of all kinds.

State-of-the-art electronics and sensors of the latest generation, built in high-quality and proven cast housing, bring the battery-powered device to the latest state of the art. Its simple and logical handling makes training unnecessary

2,450.00 *
Product data sheet
Delivery weight: 2.88 kg

In stock

MICROLEVEL opt. remote control via app

Electronic precision spirit level (horizontal) with a particularly wide prismatic measuring surface for aligning horizontal shafts with large diameters (e.g. for printing machines) according to DIN 877. Stable design made of high-quality special casting, textured lacquer. The prismatic measuring surface with an angle of 154° covers horizontal waves up to a diameter of 600 mm. The measuring surfaces are finely ground.

3,330.00 *
Product data sheet

In stock

Stable, screw-on cross spirit level made of special cast iron with 2 high-quality, ground glass spirit levels arranged at an angle of 90°. Suitable for simultaneously aligning a surface in the X and Y directions. With housing recesses for lateral insight. The measuring base is finely ground. Attachment for 2 M8 hexagon socket screws, hole spacing = 60 mm. The scale value of the longitudinal vials is given on the type plate. Magnet version and special versions available on request.
424.10 *
Product data sheet
Delivery weight: 1.83 kg

In stock

* Prices before VAT, plus delivery